| PART |
Description |
Maker |
| AN732 |
GPIB Controller for ZUP series RoHS Compliant: Yes
Designing A High-Voltage Non-Isolated Buck-Boost Converter with the Si9121DY
|
Vishay Intertechnology,Inc.
Vishay Siliconix
|
| AMS1117 AMS1117-15 AMS1117-18 AMS1117-25 AMS1117-3 |
5.0V 800mA low dropout voltage regulator
3.3V 800mA low dropout voltage regulator
2.85V 800mA low dropout voltage regulator
2.5V 800mA low dropout voltage regulator
1.8V 800mA low dropout voltage regulator
1.5V 800mA low dropout voltage regulator
800mA LOW DROPOUT VOLTAGE REGULATOR 800mA的低压差稳压
BZ Series Standard Basic Switch, Single Pole Double Throw Circuitry, 15 A at 250 Vac, Overtravel Plunger Actuator, 2,5 N - 3,61 N [9 oz - 13 oz] Operating Force, Silver Contacts, Screw Termination, CE, CSA, DEMKO,
|
Advanced Monolithic Systems, Inc.
ADMOS[Advanced Monolithic Systems]
http://
|
| AN2001 |
Designing Expansion Boards
|
Motorola, Inc.
|
| AN703 |
Designing DC/DC Converters with the Si9110 Switchmode Controller
|
Vishay
|
| AN603 |
Designing With the Si9978DW Configurable H-Bridge Controller
|
Vishay Siliconix
|
| AN1517 |
DESIGNING WITH L5972D,UP TO 2A HIGH EFFICIENCY DC/DC CONVERTER
|
SGS Thomson Microelectronics
|
| AN2001 |
Designing Expansion Boards
From old datasheet system
AN2001
|
MOTOROLA[Motorola, Inc]
|
| AN-4153 |
Designing Asymmetric PWM Half-Bridge Converters
|
http://
|
| AN704 |
Designing DC/DC Converters to Meet CCITT Specifications for ISDN Terminals
|
Vishay
|
| SAWX4A0X |
Designing with Acriche A4 Connect using a siple diode bridge directly to AC power
|
Seoul Semiconductor
|
| CMX589AMX909AMX029 |
Using Two-Point Modulation to Reduce Synthesizer Problems When Designing DC-Coupled GMSK Modulators
|
CONSUMER MICROCIRCUITS LIMITED
|
